COMPANY HEADER
Industrial-Duty Electric Motor Compressors are designed to be used every day in automotive maintenance facilities, production facilities, fabrication facilities any many more.
Request Information Search by Specification
Unit of Measure
Items
7.5hp-ind-elec.jpg

CAS 5hp Reciprocating Compressor ELITE (Vertical)

7.5hp-ind-elec.jpg

CAS 5hp Reciprocating Compressor ELITE (Vertical)

7.5hp-ind-elec.jpg

CAS 5hp Reciprocating Compressor ELITE (Horizontal)

7.5hp-ind-elec.jpg

CAS 5hp Reciprocating Compressor ELITE (Horizontal)

7.5hp-ind-elec.jpg

CAS 7.5hp Reciprocating Compressor ELITE (Vertical)
Approve Payments N/A Finance with Approve Payments

Horsepower N/A 5 hp N/A 5 hp N/A 5 hp N/A 5 hp N/A 7.5 hp
Flow at 175 Pound Per Square Inch (psi) Pressure N/A 19 ft³/min N/A 19 ft³/min N/A 19 ft³/min N/A 19 ft³/min N/A 24 ft³/min
Alternating Flow at 175 Pound Per Square Inch (psi) Pressure N/A
Delay Flow at 175 Pound Per Square Inch (psi) Pressure N/A
Voltage N/A 208-230 V N/A 208-230-460 V N/A 208-230 V N/A 208-230-460 V N/A 208-230 V
Phase N/A 1 N/A 3 N/A 1 N/A 3 N/A 1
Amp Draw 230 Volt (V) N/A 24 A N/A 16 A N/A 24 A N/A 16 A N/A 32 A
Amp Draw 480 Volt (V) N/A N/A 8 A N/A N/A 8 A N/A
Electrical Frequency N/A
Features N/A
  • Heavy duty two stage solid cast iron pump
  • Disk and spring valves
  • Bearings on both ends of the crank shaft
  • Needle bearings and inserts on rods
  • Industrial grade electric motor
  • ASME tested powder coated steel tank
  • 2 grove B width motor pulley
  • All UL electrical controls
  • Access to compressor valves without compressor head removal
  • Auto start / stop
  • Fully enclosed belt guard
  • Centrifugal unloader
  • Heavy duty air filters
  • Swedish steel valves
  • Torrington needle bearings
ELITE Features
  • Low oil monitor
  • Magnetic starter mounted and wired
  • Automatic tank drain
  • Vibration pads
Additional Information N/A
Power N/A
Tank Capacity N/A 80 gal
Tank Orientation N/A
Length N/A
Width N/A
Height N/A
Current Drawn at 230 Voltage N/A
Current Drawn at 480 Volts N/A
Stages N/A
Air Flow at 175 psi N/A
Compressor Type N/A
Pump Warranty (Optional) N/A
Industry Standards/Certifications N/A
Note N/A