The SecotecTM cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to operate even during low demand periods.
Standardmore
The SecotecTM cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to operate even during low demand periods.
Standard Features
- Powder coated removable side panels
- Air-to-air heat exchanger (except TA 5)
- Condensate separator
- Electric demand drain (except TA 5)
- R134a refrigerant
- Power cord with plug (TA 5 - TC 44)
Control Panel
- Dew point indicator
- On/off switch
- Power on LED light
- Refrigerant compressor on LED light
- Two dry contacts (on TC 31 and up) for:
- Power on
- High dew point temperature
TF Models available water-cooled.
lessSpecifications
Other Options |
N/A By-pass Piping |
Flow at 100 psi |
N/A 550 cfm |
Electric Voltage |
N/A 460 volts |
Phase |
N/A 3 |
Electrical Frequency |
N/A 60 Hz |
Connection Size |
N/A 2 1/2 inches |
Drain Connection Size |
N/A 2 x 1/4 inches |
Weight |
N/A 765 lbs |
Dimension (H x W x D) |
N/A 79 x 33 x 49 inches |
Minimum Ambient Temperature |
N/A 38o F |
Maximum Ambient Temperature |
N/A 110o F |
Maximum Inlet Temperature |
N/A 140o F |
