Manufacturer |
N/A Balcrank |
Brands |
N/A Balcrank |
Model |
N/A PANTHER® HP 5:1 Pumps |
Acceptable Mediums |
N/A Based Lubricants Gear Oil Hydraulic Fluid Synthetic and Mineral Transmission Fluid |
Ratio |
N/A 5:1 |
Air Consumption at 100 Pounds per Square Inch (psi) (7 bar) Pressure and 4 Gallons per Minute (gal/min) (15 Liters per Minute (l/min)) Flow |
N/A 24.80 scfm |
Maximum Fluid Stall Pressure at 150 Pound Per Square Inch (psi) (10 Bar) Pressure |
N/A 760 psi52 bar |
Effective Air Piston Diameter |
N/A 2.5 in63.5 mm |
| Free Flow Pump Delivery1 | N/A 6 gpm30 L/min |
Warning |
N/A
Do not use any Pride series products with flammable fluids. Verify fluid compatibility with MSDS sheets. |
Operating Air Pressure |
N/A 10 to 150 psi0.7 to 10 bar |
Efficiency |
N/A 57 cycles/gal15.06 cycles/liter |
Air Inlet Size |
N/A 1/4 in |
Air Inlet Thread Type |
N/A National Pipe Tapered (NPT) Female |
Fluid Inlet Size |
N/A 1 in1-1/2 in |
Fluid Inlet Port Thread Type for 1 Inch (in) |
N/A National Pipe Tapered (NPT) Female |
Fluid Inlet Port Thread Type for 1-1/2 Inch (in) |
N/A National Pipe Tapered (NPT) Male |
Fluid Outlet Size |
N/A 1/2 in |
Fluid Outlet Port Thread Type |
N/A National Pipe Tapered (NPT) Female |
Wetted Materials |
N/A Aluminum Buna-N™ Nickel Plated Steel Nylon Stainless Steel Steel Ultrathane |
Service Bulletin |
N/A SB 1064 |
Dimension A |
N/A 21-8/9 in555.6 mm |
Dimension B |
N/A 14-3/8 in285 mm |
Dimension C |
N/A 1-7/8 in47.6 mm |
Dimension D |
N/A 7-1/2 in190.5 mm |
Applications |
N/A
|
Note |
N/A
Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump. Contact Balcrank for specific system design performance and technical data. Product specifications are subject to change without prior notice |
