Compressed Air Systems, Inc.
Compressed Air Systems, Inc.
9303 Stannum StreetTampa, FL 33619-2658
Toll: 855.464.8525
Ph: 813.626.8177
Fx: 813.628.0187
Email: [email protected]
Print Back
Ideal for hydraulic crane trucks that need an air compressor - this package keeps you working without relying on your truck engine.

This self-contained system can be fully integrated into any diesel work truck fuel system or skid-mounted for stand-alone applications with an optional external fuel tank.
Unit of Measure

Financing

Approve Payments

 N/A Finance with Approve Payments

Specifications

Height

 N/A 29 in73.7 cm

Width

 N/A 23 in58.4 cm

Length

 N/A 33 in

Brands

 N/A VMAC®

Air Compressor Output at 100 Pound Per Square Inch (psi) (Maximum 175 Pound Per Square Inch (psi))

 N/A 45 ft³/min

Air Compressor Type

 N/A Belt-driven, 100% duty cycle, VMAC® oil-injected rotary screw

Engine

 N/A Kubota Diesel D902 3-cylinder, naturally aspirated 3,600 RPM, Tier 4 Final

Approximate Weight (Wet)

 N/A 500 lb227 kg

Included Power Take-Off (PTO)

 N/A Clutched SAE ‘A’ port with 9-toothed spline, 2,800 RPM output, 35 ft-lb continuous torque (max)

Hydraulic Pump Flow at Maximum 3500 Pound Per Square Inch (psi)

 N/A Or choose your own 10 gpm5 gpm8 gpm

Throttle Control

 N/A 2-speed throttle, responds to air demand

Battery

 N/A AC Delco 12 V, 460 CCA, 575 CA

Noise Level (High Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 81.2 dB

Noise Level (Low Idle) at 21 Feet (ft) (6.4 Meters (m))

 N/A 76 dB

Noise Level (Standby Mode) at 21 Feet (ft) (6.4 Meters (m))

 N/A 0 dB

Power Source

 N/A Hydraulic

Fuel Supply Options

 N/A
  • 7-Gallon tank with fuel gauge and low fuel shut-off sensor
  • External Diesel Fuel Pump Kit

Air Receiver Tank (Recommended, Not Included)

 N/A Minimum 10-Gallon Air Receiver Tank - Recommended for proper operation of all functions.

Dimensions

Mounting Plate Length

 N/A 20 in50.8 cm

Mounting Plate Width

 N/A 20 in50.8 cm

Components Included

Components Included

 N/A Air Compressor
  • High airflow, 100% duty cycle with the reliability of the global leader in mobile compressed air.
  • 45 CFM Rotary Screw Air Compressor
PTO Port
  • 2,800 RPM Power Take-off Port.
Cold Climate Protection for -40º
  • Cold Climate Protection recommended if ambient temperatures frequently drop below -10 ºC (14 ºF). Combine with optional 1000W inverter and warm the system on the way to the job site.
  • Factory-installed Cold Climate Kit - 120 V, tested to -40 °F (-40 °C)

Cold Climate Protection

Cold Climate Protection

N/A
  • Adjustable glow plug control.
  • Engine and compressor will wait till the temperatures are above 41 ºF (5 ºC) before loading and going into a running state.
  • Engine will automatically restart when system temperature falls below 23 ºF (-5 ºC); small heat strip included in LCD Digital Control Box.
  • Battery jump start connections are recommended to be tied into the truck batteries in locations where extreme cold is expected. It is not necessary in mild climates.

Control System

Control System

 N/A
  • Customizable digital controls
  • Remote mounted compressor control panel
  • Any one function or all three can be selected at any time
  • Engine auto-restarts with air demand
  • Separate selector switches engage compressor, and PTO
  • With compressor only selected, and sustained periods of no air use, the control system will shut down the engine
  • With any other function selected, the engine will not shut down automatically
  • Programmable auto restart for cold temperature or low battery voltage

Warranty

Warranty

 N/A Two years on all major components; VMAC® air ends are covered by VMAC®’s Lifetime Warranty; the Kubota engine is covered by Kubota’s 2-Year warranty.

Applications

Applications

 N/A Common jobs that use the Compressor-Generator Power System:
  • Mobile heavy duty mechanics
  • Heavy equipment repair technicians
  • Remote access jobs in mining, logging and oil & gas